T-2206 provide 6-port Gigabit Switch with Adaptive 4 x10/100/1000M RJ45 ports and 2x1000M standard SFP fiber port, users may need to use different SFP modules, such as 1000Base-T, 1000Base-SX, 1000Base -LX and so on. Switch by the United States the latest Marvell IC, stable performance and excellent quality, with a higher cost. For small optical Ethernet and optical network with special needs.
Features
- Provides 4-Port 10/100/1000 Mbps RJ-45 and 2-port GIGA SFP fiber ports
- Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3x flow control standards
- SFP port supports 1000BASE-SX/LX modules
- Supports 10/100Mbps auto-detect half/full duplex and 1000Mbps at full duplex
- Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
- Supports 802.3x flow control pause packet for full duplex
- Supports up to 10K Byte Jumbo frames
- LEDs to indicate: 10/100/1000Mbps, Link/Act. and Power Status
- Slim & Compact design
- RoHS Compliance
Technical Specification
- Standard compliance :
- IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
- IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
- IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)
- IEEE 802.3Z 1000Base-T Ethernet(Gigabit Fiber)
- ANSI/IEEE 802.3 Auto-negotiation
- MAC Address : 1K
- Network Interface : 4 x10/100/1000Mbps RJ-45 ports
- Media :
- 10BASE-T: UTP Cat. 3, 4, 5 or up
- 100BASE-TX: UTP Cat. 5 or up
- 1000BASE-T: UTP Cat. 5 or up
- fiber multi-mode：50/125，62.5/125μm（distance up to 550/224M）
- fiber single-mode：8/125，8.7/125，9/125μm（distance up to 10～100KM）
- Transmission Mode : 10/100Mbps, full/half-duplex (Auto-sensing)
- Buffer Memory : 1Mbit on chip frame buffer
- Switching Method : Store & forward
- Size: 31(H)×102(W)×144(L)mm
|
|
LED |
Color |
Function |
|
Global |
POWER |
Green |
Lit when +5V power is coming up |
|
TP Port 1-4 |
LINK/ACT |
Green |
Lit when connection with remote device is good
Blinks when any traffic is present |
|
TP Port 1-4 |
1000/100Mbps |
Green/Amber |
Lit Green when TP link on 1000Mbps speed
Lit Amber when TP link on 100Mbps speed
Off when 10Mbps or no link occur |
|
SFP port1,2 |
SFP1,2 |
Green |
Lit when SFP connection is good
Blinks when SFP data is transmitting |
- Ordering:
|
Model No. |
Description |
|
OPT-2206 |
4x10/100/1000M + 2x SFP ports |
Công ty Viễn Thông Tuấn Linh
Số 20 CTT12 Kiến Hưng Luxury, Hà Đông, Hà Nội
Điện thoại: 0916.955.988 – 0979.010.568 - 024.2242.5522
Facebook: https://www.facebook.com/ctytuanlinh
Email: tuanlinhpc44@gmail.com
